Glove box workstation
- Brand: MBRAUN 200B ECO Modular glove box workstation
- N₂ with leak rate <0.05 vol%h (acc. iso 10648-2).
- Two glove box interconnected called “Gilda”.
- Four gloves box contains an integrated spin coater, a blade coater and one precision balance.
- Three glove box is for dry processes, and includes a metal evaporator with two sources and UV curing equipment.
Evaporator
- Brand:MBRAUN Thermal evaporator
- For substrates up to 200×200 mm or 300 mm wafers
- Recipe programmable PLC control,
- Ultimate vaccum down to: < 9 x 10-7mbar
- Typically used for electrodes only (such as Ag, Al, Au, LiF, Ca, MoO3, Cr)
Blade coater (Doctor Blade)
- Brand: ZEHNTER ZAA 2300 Automatic film applicator
- Drawing speed 0 – 99 mm/s (0 – 3.9“/s).
- We developed additional electronics to make speed profiles.
- Heating stage.
- Two units, one inside a glovebox, the other in a fume hood.
Natural convection electrical oven
- Brand: BOREL DIGITHEAT-TFT.
- Digital temperature controller.
- Set run time and waiting time before starting the run.
- RS-232 port.
- Safety thermostat.
- Maximum temperature: 250 °C
Tabletop centrifuge
- Brand: HETTICH EBA 280
- Max. capacity 6 x 50 mL
- Max. rpm/rcf 6,000/5,071
UV lamp
- Broad spectrum
- Time programmable
- Power: 7W.
Fume hoods
- Brand: ROMERO FRLOWTRONIC
- Safety standard UNE EN 14175
Spincoater
- Brand: POLOS SPIN150i
- Substrates from 5 mm up to Ø150 (or 6”) or 4″ x 4″ substrates.
- Detachable touch panel.
- Program Storage for recipes with multiple steps each
Magnetic stirrers with heating
- Brand: IKA RET basic / IKA C-MAG HS 7
- Wide speed range from 50 – 1700 rpm
- Integrated temperature control.
- Heating plate temperature range 50 – 380 °C .
- Ceramic heating plate with fixed safety circuit of 550 °C.
Precision balance
- Brand: METTLER TOLEDO
- Max. capacity: 120
- Readability: 0.01 mg
